AiP74HCT125

The AiP74HC245 is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE — ) and send/receive (DIR) for direction control. A HIGH on (OE —)causes the outputs to assume ahigh-impedance OFF-state. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC

The AiP74HCT245 is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE — ) and send/receive (DIR) for direction control.

The AiP74HC138 decodes three binary weighted address inputs(A0, A1 and A2) to eight mutually exclusive outputs (Y(—)0 to Y(—)7). 

The AiP74HCT138 decodes three binary weighted address inputs(A0, A1 and A2) to eight mutually exclusive outputs (Y(—)0 to Y(—)7). 

The AiP74HCT597 is an 8-bit shift register with input flip-flops

The AiP74HCT597 is an 8-bit shift register with input flip-flops

The AiP74HC is a quad 2-input NOR gate. Inputs include clamp diodes. 

The AiP74HCT02 is a quad 2-input NOR gate. Inputs include clamp diodes. 

The AiP74HC166 is an 8-bit serial or parallel-in/serial-out shift register. 

The AiPHCT166 is an 8-bit serial or parallel-in/serial-out shift register.

The AiP74HCT123 are high-speed Si-gate CMOS devices and are pin compatible with Low-power Schottky TTL (LSTTL).

The AiP74HC123 are high-speed Si-gate CMOS devices and are pin compatible with Low-power Schottky TTL (LSTTL).

The AiP74HC125 is a quad buffer/line driver with 3-state outputs controlled by the output enable inputs (nOE(—)). 

The AiP74HCT125 is a quad buffer/line driver with 3-state outputs controlled by the output enable inputs (nOE(—)). 

The AiP74HC390 is a dual 4-bit decade ripple counter divided into four separately clocked sections. 

The AiP74HCT390 is a dual 4-bit decade ripple counter divided into four separately clocked sections. 

The AiP74HC157 are quad 2-input multiplexers which select 4 bits of data from two sources under the control of a common data select input (S). 

The AiP74HCT157 are quad 2-input multiplexers which select 4 bits of data from two sources under the control of a common data select input (S). 

The AiP74HC164 is an 8-bit serial-in/parallel-out shift register. e AiP74HC/HCT164 is an 8-bit serial-in/parallel-out shift register. The device features two serial dataThe AiP74HC/HCT164 is an 8-bit serial-in/parallel-out shift register. The device features two serial data inputs (DSA and DSB), eight parallel data outputs (Q0 to Q7). inputs (DSA and DSB), eight parallel data outputs (Q0 to Q7).

AiP74HCT164 is an 8-bit serial-in/parallel-out shift register.

The AiP74HC48 feature active-low outputs designed for driving common-anode LEDs or incandescent indicators directly. 

The AiP74HCT48 feature active-low outputs designed for driving common-anode LEDs or incandescent indicators directly.

The AiP74HC/HCT237 is a 3-to-8 line decoder, demultiplexer with latches at the three address inputs (An). 

The AiP74HCT237 is a 3-to-8 line decoder, demultiplexer with latches at the three address inputs (An). 

The AiP74HC/HCT238 decodes three binary weighted address inputs (A0, A1 and A2) to eight mutually exclusive outputs (Y0 to Y7).

The AiP74HC/HCT238 decodes three binary weighted address inputs (A0, A1 and A2) to eight mutually exclusive outputs (Y0 to Y7).

The AiP74HC257 is a quad 2-input multiplexer with 3-state outputs. 

The AiP74HC/HCT257 is a quad 2-input multiplexer with 3-state outputs.